Dry VOC Adsorbers — Technical Guides

Browse technical guides on Dry VOC Adsorbers. Each guide covers one engineering topic in depth, with worked numerical examples, stated assumptions and references to published standards and sources. You are welcome to reuse the tables with a link back to the guide they come from.

All guides

• Breakthrough Monitoring or Scheduled Change-Out? Two Ways to Keep a Carbon Adsorber in Compliance
  Rules accept continuous outlet monitoring or replacement on a fixed schedule shorter than the calculated life. How to choose, with a worked comparison.
• Carbon Adsorption or Thermal Oxidation for VOCs? Deciding by Concentration, Flow and Cost
  A practical comparison of dry carbon adsorption and regenerative thermal oxidation for VOC control, using EPA efficiency and flow ranges and a fuel calculation.
• Converting VOC Limits: ppm, mg/m³ and g/h, With a Table for 16 Common Solvents
  Convert VOC concentrations between ppm and mg/m³ at 0 °C and 25 °C, with a table for 16 solvents, the formulas, and the reference-condition traps.
• Empty Bed Contact Time: How VOC Adsorber Beds Are Sized
  Empty bed contact time, face velocity and bed depth with worked numbers, including pressure drop for granular carbon and why a deeper bed is not automatic.
• How Long Will an Adsorber Bed Last? A Worked Mass-Loading Calculation
  Estimate carbon bed life from concentration, airflow and working capacity, with a table across four concentrations and the assumptions that move the answer.
• How to Choose a Dry VOC Adsorber Manufacturer: 10 Checks on Design, Safety and Support
  Ten checks for choosing a dry VOC adsorber manufacturer: contact time, formats, built-in safety instrumentation, media, monitoring, oxidizer option and support.
• Why Humid Exhaust Reduces VOC Adsorber Capacity, and What to Do About It
  Water vapor competes with solvents for carbon pores. The evidence on the 50% RH threshold, and a table showing when reheating works and when it does not.